Dig 710A-150 Battery Operated Controller With 1 1/2" Inline Valve
Single station battery operated controller with 1 1/2” inline valve. Completely waterproof and able to operate in harsh environments, the 710A series single-station battery operated controller is used for above-ground or below-grade installation on a wide range of brand name valves.
SKU: 710a-150
Type: DC Latch
Body: IP68
Program mode: seven keypad buttons with integrated liquid crystal display
Power source: two AA alkaline batteries (not included)
Latching Solenoid: 7-12 VDC, two-way, normally closed
Completely waterproof (IP68 certified) - can operate in harsh environments
Solenoid control orifice: .065 (1.65 mm)
Encapsulated solenoid thread: 11/16”-12 UN male thread
Retractable solenoid wire: 8.1” (coiled length when extended, approximately 36”
Sensor connection: normally closed 6” (15 cm) yellow wire (16 AWG)
Adapters included to convert Rain Bird, Hunter and Toro valves (model 710-000)
Valve type: 1 1/2” globe inline valves (NPT or BSP) or 1 1/2" actuator and anti-siphon valve (NPT)
Single station battery operated controller with 1 1/2” inline valve. Completely waterproof and able to operate in harsh environments, the 710A series single-station battery operated controller is used for above-ground or below-grade installation on a wide range of brand name valves.
SKU: 710a-150
Type: DC Latch
Body: IP68
Program mode: seven keypad buttons with integrated liquid crystal display
Power source: two AA alkaline batteries (not included)
Latching Solenoid: 7-12 VDC, two-way, normally closed
Completely waterproof (IP68 certified) - can operate in harsh environments
Solenoid control orifice: .065 (1.65 mm)
Encapsulated solenoid thread: 11/16”-12 UN male thread
Retractable solenoid wire: 8.1” (coiled length when extended, approximately 36”
Sensor connection: normally closed 6” (15 cm) yellow wire (16 AWG)
Adapters included to convert Rain Bird, Hunter and Toro valves (model 710-000)
Valve type: 1 1/2” globe inline valves (NPT or BSP) or 1 1/2" actuator and anti-siphon valve (NPT)
Single station battery operated controller with 1 1/2” inline valve. Completely waterproof and able to operate in harsh environments, the 710A series single-station battery operated controller is used for above-ground or below-grade installation on a wide range of brand name valves.
SKU: 710a-150
Type: DC Latch
Body: IP68
Program mode: seven keypad buttons with integrated liquid crystal display
Power source: two AA alkaline batteries (not included)
Latching Solenoid: 7-12 VDC, two-way, normally closed
Completely waterproof (IP68 certified) - can operate in harsh environments
Solenoid control orifice: .065 (1.65 mm)
Encapsulated solenoid thread: 11/16”-12 UN male thread
Retractable solenoid wire: 8.1” (coiled length when extended, approximately 36”
Sensor connection: normally closed 6” (15 cm) yellow wire (16 AWG)
Adapters included to convert Rain Bird, Hunter and Toro valves (model 710-000)
Valve type: 1 1/2” globe inline valves (NPT or BSP) or 1 1/2" actuator and anti-siphon valve (NPT)
